Research on Landmine Press · Every study we found · How we choose studies

Checked automatically against the study
A camera system tracked landmine press bar speed about as well as a bar sensor.
Camera and bar sensor agreed closely (correlation above 0.85) on bar speed and power over 247 lifts; no training effect was measured.
This was a lab study that tested a new way to measure the landmine press. A camera with smart software tracked the bar with nothing attached to it. Researchers compared it with a common bar sensor over 247 lifts with 20 to 35 kg loads. Both tools closely matched on bar speed and power. The camera read speeds a bit high, but by a predictable amount.
Who took partThe abstract doesn't sayLimitsThe abstract doesn't say how many people took part or who they were.It tested a measuring tool, not whether the exercise builds strength or muscle.Only loads from 20 to 35 kg were tested.
Why this bandA one-off lab test of 247 peopleAbout this exercise: it’s in the titleIn a recognised free-to-read journal (DOAJ)Published recently, so not yet widely cited
- Use the landmine press as a way to check your pushing strength, since the authors call it a reliable test.
- If you track bar speed, stick with the same tool so your numbers stay comparable from week to week.
- Kind of study
- A lab study
- People
- 247 lifts measured (number of people not given)
- What they looked at
- Performance, how you move
Original title: Landmine Press Kinematics Measured with an Enhanced YOLOv8 Model and Mathematical Modeling
Zhao R, Cong R, Zhou R and others · Sensors (Basel, Switzerland) · Wed Feb 11 2026 · DOI 10.3390/s26041161